橡胶硬度计资料

橡胶硬度计资料
Type	Application /	Standards	Spring Load	Size of Indentor(mm)	Model
	Materials		0-100	Size / Height
A	For the most popular rubber, elastomers		550-8050mN	Truncated Cone of Ø0.79 with 35° angle / 2.50	GS-719N : Standard type
		JIS K 6253	(56.1 - 821.1gf)
		JIS K 7215
		ISO 7619
					GS-719G : Peak Pointer type
		ISO 7619			GSD-719 : Digital type
					GS-719H : Deep Hole type
		ISO 868			GSD-719H : Deep Hole and Digital type
					GS-719L : Long Leg type
		ASTM 2240(DIN 53 505)			GSD-719L : Long Leg and Digital type
					GS-709N : Standard type
		Type A Durometer			GS-709G : Peak Pointer type
D	For the hardest materials ,	JIS K 6253	0-44450mN		GS-720N : Standard type
	plastics, hard rubbers		( 0 - 4533gf)	conical cone of R0.1 with 30° angle / 2.50
		JIS K 7215
		ISO 7619
					GS-720G : Peak Pointer type
		ISO 7619			GSD-720 : Digital type
					GS-720H : Deep Hole type
		ISO 868			GSD-720H : Deep Hole and Digital type
					GS-720L : Long Leg type
		ASTM 2240(DIN 53 505)			GSD-7ZOL : Long Leg and Digital type
					GS-702N : Standard type
		Type D Durometer			GS-702G : Peak Pointer type
E	Materials of hardness of eraser.	JIS K 6253	550-8050mN	Hemisphere of R2.50 / 2.50	GS-721N : Standard type
	Dense textile winding	Type E Durometer	(56.1 - 821.1gf)		GS-721G : Peak Pointer type
					GSD-721 : Digital type
SRIS		SRIS 0101	539-8379mN	Hemisphere of Ø5.08 / 2.54	GS-701N : Standard type
		JIS S6050	(55-855gf)		GS-701G : Peak Pointer type
					GSD-701 : Digital type
(old) A	For the most popular rubber, elastomers	JIS K 6301		Truncated Cone of Ø0.79 with 35° angle / 2.54	GS-706N : Standard type
		Spring Type A Style			GS-706G : Peak Pointer type
					GSD-706 : Digital type
(old) C	Hard rubber	JIS K 6301	980-44100mN		GS-703N : Standard type
		Spring Type A Style	(100-4500gf)		GS-703G : Peak Pointer type
E2	Rubber softer than eraser	TECLOCK E2 Durometer	550-4300mN	Hemisphere of R2.50 / 2.50	GS-743G : Peak Pointer type
			(56.1 - 438.6gf)		GSD-743 : Digital type
FO	Soft foam materials such as urethane foam	TECLOCK FO Durometer		Cylindrical Cone of Ø25.2 / 2.50	GS-744G : Peak Pointer type
					GSD-744 : Digital type
B	Materials slightly harder than the materials for the TYPE A.	ASTM D 2240	550-8050mN	conical cone of R0.1 with 30° angle / 2.50	GS-750G : Peak Pointer type
	Possible for biscuit ware clay	Type B Durometer	(56.1 - 821.1gf)		GSD-750 : Digital type
C	For hard rubber usable for the golf ball	ASTM D 2240	0-44450mN	Truncated Cone of Ø0.79 with 35° angle / 2.50	GS-751G : Peak Pointer type
		Type C Durometer	( 0 - 4533gf)		GSD-751 : Digital type
DO	For hard rubber free from the measuring trace.Hardness of like the automobile's handle	ASTM D 2240		Hemisphere of R1.19 / 2.50	GS-752G : Peak Pointer type
		Type DO Durometer			GSD-752 : Digital type
O	Similar to Type E	ASTM D 2240	550-8050mN		GS-753G : Peak Pointer type
	Good for packing materials such as the styrene foam	Type O Durometer	(56.1 - 821.1gf)		GSD-753 : Digital type
OO	For soft materials easy to distort a soft touch of a finger	ASTM D 2240	203-1111mN		GS-754G : Peak Pointer type
		Type OO Durometer	(20.7 - 113.31gf)		GSD-754 : Digital type